Description
The Sanders Armory Corp 7.62 x 39 MPI Tested Phosphate Bolt Head with Phosphate Extractor. The 9310 Steel MPI Tested bolt with Phospate finish that will not flake off, produces less friction while increasing the life of the bolt head. The 7.62 x39 Extractor has been Phosphate treated per MIL-STD-171 to ensure it will not crack, fracture or shatter but will be protected from wear and elements. 1 year warranty against manufacturers defects.
Note: While properly performed nitrocarburization treatment (Black Nitride) is great for a bolt carrier, it is a sub-par choice for bolts and extractors. The nitriding process will cause these parts to become brittle. This translates to decreased bolt life, usually significantly. The nitriding process involves submerging the steel in a liquid salt bath that is over 1,000 degrees. We take extra steps to make sure the heat treating, and stress relieving of these steel parts has not been compromised.
To maintain heat treating, strength and reliability, our bolts and extractors are phosphate coated.
Bolt Specifications:
- 7.62 x39
- AISI 9310 VAR (vacuum arc remelt) moly, nickel steel
- Enhanced design
- Beveled locking surface
- Carbon/fouling relief area for high fire rates
- Phosphate per MIL-STD-171
NO shipping to District of Columbia (Washington, D.C.); Massachusetts; Connecticut; Chicago, Cook County, Deerfield, Highland Park or Aurora Illinois; New Jersey; New York; Puerto Rico; Hawaii; or Canada. NO international shipping, all must be within the 48 Contiguous United States. NO APO/PPO/FPO’s.
